Spiral Pasteurization System
Application
The spiral pasteurizer CSP is used to pasteurize packaged food products and combines efficient process characteristics with a compact design. The system consists of two independent spiral systems with clearly separated heating and cooling zones: in the heating zone, products are brought up to the required temperature quickly and evenly to reliably reduce micro-organisms. Controlled recooling then locks in stable product quality. The continuous, controlled process significantly improves shelf life and product safety.
The innovative design meets all of today’s requirements with regard to product quality, cost-effectiveness, durability, energy efficiency and hygiene.
Function
A – Cooking
Products are transferred on the conveyor belt of the spiral cooker CSH at the infeed. The belt runs spiral over several levels around a drive drum. Heat energy is transferred to the products by direct saturated-steam injection. Several spray lances distributed throughout the spiral system ensure even injection of saturated steam. Optionally, heat exchangers can be installed. Several fans distribute the heated air evenly throughout the spiral cooker. The products are thus evenly enveloped in warm air during conveying and brought to temperature quickly and effectively. The products are then transferred to the downstream drying conveyor.
B – Drying
A drying conveyor CLB is installed between the spiral cooker and the spiral cooler. The drying conveyor serves as the connecting section between the spiral cooker and spiral cooler. During transport, the products are efficiently dried by powerful fans combined with air-knife blades and then transferred to the spiral cooler.
C – Cooling
Products are transferred on the conveyor belt of the spiral cooler CSC at the infeed. The belt runs spiral over several levels around a drive drum. The cooling energy is transferred to the ambient air via high-performance evaporators. Several fans push the air horizontally through the evaporator fins to be cooled and distribute it evenly across the entire belt width and all tiers. During conveying, the products are evenly enveloped in cold air from all sides, cooling them quickly and effectively.
All parameters such as dwell times, process temperatures, air speeds etc. can be set individually for each product and each individual machine. All parameters and functions are managed by a modern PLC control system, operated via a clearly structured touch panel.
Features
- Ideal for the continuous cooking & cooling of packaged food products to substantially extend shelf life
- Spiral conveying technology for a maximum belt length (product capacity) on a minimal footprint
- Extremely safe, low-tension and smooth belt travel thanks to an innovative direct-drive belt system
- Optimal belt loading / coverage through a spiral conveyor belt without a “centre track” (no “small-radius belt”!)
- Optimal product results through effective, uniform, horizontal co-current and counter-current air management in both spiral systems
- Energy savings through horizontal air management, low-consumption fans and efficiently insulated machine housing with minimized infeed and outfeed openings
- Innovative saturated-steam injection system combined with horizontal air management in the spiral cooker
- Powerful, efficient and energy-saving evaporator and fan unit in the spiral cooler
- Integrated, effective blow-off drying conveyor between the spiral systems
- Drives, sensors and cable routing outside the thermal zones
- Modern PLC control with a clearly structured operating display
- Easy, safe operation and recipe management via a modern control system with a clear, visualized menu-guided display
- Many product- and application-specific extras available (e.g. CIP system, belt side plates, tangential infeed belt, steam heating register, defrost systems)
- Optimal accessibility for cleaning and maintenance
- High-end hygiene and safety design
- Cost-effective transport solutions and extremely short installation, assembly and commissioning times thanks to an innovative, unique modular design
Specification
Spiral cooker
- Direct saturated-steam injection system
- Continuously adjustable dwell times, process temperatures and air speeds
- Housing, inner and outer walls in stainless steel V2A, 1.4307 (AISI 304L)
- Inner walls of the insulated housing fully welded
- High-quality, robust conveyor belt in stainless steel V4A, 1.4404 (316L)
- Insulated doors with safety release
- Designed for easy cleaning and maintenance
- Direct-drive systems (no chains)
- Main drive (drum) outside the cooking chamber on the top of the housing roof “top drive”
- Secondary drive (belt tension) outside the cooking chamber
- All sensors outside the cooking chamber
- Direct-drive belt system with stainless-steel conveyor belt
- Cable routing in stainless-steel mesh trays outside the cooking chamber
- Exhaust chimneys with control flaps
- Fans in stainless steel
- External swiveling LED lights for interior illumination
- PLC control with 9-inch TP900C touch screen – visualized user interface, recipe management
Drying belt
- Continuously adjustable dwell times and blow-off power
- Frame made of laser-cut stainless-steel sheets
- Plastic conveyor belt with knife edges at infeed and outfeed
- Drip tray beneath the belt system
- Powerful fan combined with multiple nozzles (air knives)
Spiral cooler
- Powerful, efficient and energy-saving evaporator and fan unit
- Continuously adjustable dwell times, process temperatures and air speeds
- Insulated housing with stainless-steel inner surfaces and painted (coated) outer surfaces
- Fully welded stainless-steel floor with two defined drains
- Insulated doors with all-round frame heating and safety release
- Designed for easy cleaning and maintenance
- Direct-drive systems (no chains)
- Direct-drive belt system with stainless-steel conveyor belt
- Cable routing in stainless-steel mesh trays
- LED lights for interior illumination
- PLC control with 9-inch TP900 touch screen – visualized user interface, recipe management